Home » You searched for C_S43_2023 Praxisprüfung 🛷 C_S43_2023 Fragen Und Antworten 📟 C_S43_2023 German 🐇 Suchen Sie einfach auf ☀ www.itzert.com ️☀️ nach kostenloser Download von 《 C_S43_2023 》 😊C_S43_2023 Prüfungsfragen » Page 6
Search Results for: C_S43_2023 Praxisprüfung 🛷 C_S43_2023 Fragen Und Antworten 📟 C_S43_2023 German 🐇 Suchen Sie einfach auf ☀ www.itzert.com ️☀️ nach kostenloser Download von 《 C_S43_2023 》 😊C_S43_2023 Prüfungsfragen
Surface water drains made from cast 316 stainless steel or bronze. Ideal for stormwater drainage in external applications such as laneways, urban and pedestrianised areas, around commercial or residential buildings or any space that requires a surface water drain such as outdoor showers.
The Storm Series also works well in interior applications such as commercial kitchens, production facilities and factories. The cast stainless Storm Series floor drain has been used in bars, restaurants and public facilities for its industrial aesthetics.
Compatible with surface finishes such as concrete, tiles, epoxy floors and pavers. Can be used in a podium set up with the Sureflow or a large diameter flange and clamp ring.
-
- Durable cast construction
- Square or Round
- Spigot fits inside pipe riser with O-ring seal
(100x80mm grates c/w spigot / push fit without o-ring)
- Suit pipe size: 80mm, 100mm and 150mm
- Grate sizes: 100mm, 150mm, 200mm and 300mm
- Independent flow rate tested
Storm Series Read More »
Surface water drains made from cast 316 stainless steel or bronze. Ideal for stormwater drainage in external applications such as laneways, urban and pedestrianised areas, around commercial or residential buildings or any space that requires a surface water drain such as outdoor showers.
The Storm Series also works well in interior applications such as commercial kitchens, production facilities and factories. The cast stainless Storm Series floor drain has been used in bars, restaurants and public facilities for its industrial aesthetics.
Compatible with surface finishes such as concrete, tiles, epoxy floors and pavers. Can be used in a podium set up with the Sureflow or a large diameter flange and clamp ring.
-
- Durable cast construction
- Square or Round
- Spigot fits inside pipe riser with O-ring seal
(100x80mm grates c/w spigot / push fit without o-ring)
- Suit pipe size: 80mm, 100mm and 150mm
- Grate sizes: 100mm, 150mm, 200mm and 300mm
- Independent flow rate tested
The Allproof Low Cast-in Passive Fire Collars are designed and tested for a diverse range of plastic plumbing pipes in on-site poured concrete floors for both stack and floor waste penetrations. These low cast-in collars follow a similar installation method to the standard cast-in collar. The innovative design allows for straightforward attachment of the cast-in fire collar base to the formwork, with the pipe penetration serving as the riser to the required height during concrete pouring. It is essential to cap the pipe to prevent concrete ingress during construction, eliminating the need for post-construction core drilling of penetrations and retrofitting fire collars or wraps. This approach facilitates the installation of structural steel around the penetration.
Comprising of intumescent strip(s) enclosed in a recycled PPE plastic casing with a fixing base, the low cast-in fire collars expand against the casing in the event of a fire. Equipped with a steel ring at the base, they ensure rapid activation of the intumescent material, forming a reliable fire-resistant seal that upholds both fire integrity and insulation.
Allproof’s Low Cast-in Collars are designed and made in New Zealand and undergo rigorous testing at accredited fire laboratories.
Low Cast-In Collars Read More »
The Allproof Low Cast-in Passive Fire Collars are designed and tested for a diverse range of plastic plumbing pipes in on-site poured concrete floors for both stack and floor waste penetrations. These low cast-in collars follow a similar installation method to the standard cast-in collar. The innovative design allows for straightforward attachment of the cast-in fire collar base to the formwork, with the pipe penetration serving as the riser to the required height during concrete pouring. It is essential to cap the pipe to prevent concrete ingress during construction, eliminating the need for post-construction core drilling of penetrations and retrofitting fire collars or wraps. This approach facilitates the installation of structural steel around the penetration.
Comprising of intumescent strip(s) enclosed in a recycled PPE plastic casing with a fixing base, the low cast-in fire collars expand against the casing in the event of a fire. Equipped with a steel ring at the base, they ensure rapid activation of the intumescent material, forming a reliable fire-resistant seal that upholds both fire integrity and insulation.
Allproof’s Low Cast-in Collars are designed and made in New Zealand and undergo rigorous testing at accredited fire laboratories.
The low-profile pipe collars are designed to be installed in concrete, brick or masonry fire rated walls and floors, and fire rated plasterboard walls. The Allproof pipe collars consist of intumescent material encased in a steel surround with fixing tabs. The advanced intumescent technology allows Allproof to achieve a very low-profile height of only 27mm for the 25-80mm pipe collars.
When fire occurs, the intumescent material expands against the steel surround as the flammable plastic pipe running through the collar melts and burns away. The steel casing acts as an excellent heat sync ensuring fast activation of the intumescent, forming a stable fire-resistant plug, maintaining both fire integrity and insulation.
Pipe collars are designed to be exposed in a wall or floor application (i.e. face fixed). The collars should always be fixed to the underneath of the concrete floor. In wall situations one collar should be used on each exposed side of the fire rated wall.
Designed, made and tested in New Zealand for NZ applications.
Low Profile Fire Collars Read More »
The low-profile pipe collars are designed to be installed in concrete, brick or masonry fire rated walls and floors, and fire rated plasterboard walls. The Allproof pipe collars consist of intumescent material encased in a steel surround with fixing tabs. The advanced intumescent technology allows Allproof to achieve a very low-profile height of only 27mm for the 25-80mm pipe collars.
When fire occurs, the intumescent material expands against the steel surround as the flammable plastic pipe running through the collar melts and burns away. The steel casing acts as an excellent heat sync ensuring fast activation of the intumescent, forming a stable fire-resistant plug, maintaining both fire integrity and insulation.
Pipe collars are designed to be exposed in a wall or floor application (i.e. face fixed). The collars should always be fixed to the underneath of the concrete floor. In wall situations one collar should be used on each exposed side of the fire rated wall.
Designed, made and tested in New Zealand for NZ applications.
Acoustic Pipe Insulation
For noisy pipes in buildings, NuWrap 5 is the effective and easy-to-install sound lagging solution. Also suitable for ducting and ventilation fans, it is supplied with 4-Zero foil facing as standard. Designed to meet the requirements of the building code, NuWrap 5 is available in rolls and as pre-cut ‘fittings’ for quick and easy installation. NuWrap 5 Acoustic Pipe Lagging combines acoustic convoluted open cell foam laminated to NuWave acoustic barrier.
-
- Compliant with all New Zealand building standards for acoustic and fire requirements
- High-performance polyurethane de-coupling open cell foam
- Foil-faced with scrim-reinforced fire-resistant aluminium
- Suitable for soil/waste pipes and all types of ductwork
- Low VOC, Green Council Building compliant
- 5.1 kg/m2 25mm convoluted foam
- Continuous operating temperature of 100°C
- Thinner, lighter and easier to install
Complies with Green Star & Green Building Council, low VOC requirements. Also meets ODPEMI9 “avoids the use of ozone depleting substances used in both the manufacture and product composition”.
NuWrap5 Read More »
Acoustic Pipe Insulation
For noisy pipes in buildings, NuWrap 5 is the effective and easy-to-install sound lagging solution. Also suitable for ducting and ventilation fans, it is supplied with 4-Zero foil facing as standard. Designed to meet the requirements of the building code, NuWrap 5 is available in rolls and as pre-cut ‘fittings’ for quick and easy installation. NuWrap 5 Acoustic Pipe Lagging combines acoustic convoluted open cell foam laminated to NuWave acoustic barrier.
-
- Compliant with all New Zealand building standards for acoustic and fire requirements
- High-performance polyurethane de-coupling open cell foam
- Foil-faced with scrim-reinforced fire-resistant aluminium
- Suitable for soil/waste pipes and all types of ductwork
- Low VOC, Green Council Building compliant
- 5.1 kg/m2 25mm convoluted foam
- Continuous operating temperature of 100°C
- Thinner, lighter and easier to install
Complies with Green Star & Green Building Council, low VOC requirements. Also meets ODPEMI9 “avoids the use of ozone depleting substances used in both the manufacture and product composition”.
The Perimeter Drain presents an innovative and premium solution for simplifying level threshold drainage. Simply position the L-shaped channel against the building’s exterior footing to establish a surface for pouring concrete against. This unique design eliminates the need for labour-intensive tasks like boxing out or multiple concrete pours.
Channels are supplied in standard one-meter lengths, the GFP grate is specially designed for the system and available off the shelf in 500mm lengths. The GFP grates and innovative clip system are manufactured in New Zealand from recycled materials. The grate is designed so it can be easily trimmed down on site to fit the reveal width along the channel as joinery steps in and out from the building line. Grates effortlessly clip onto the channel using the pre-installed fixing points, allowing for easy installation, maintenance, and a secure finish. Height-adjustable legs on the grate’s underside provide support, eliminating the need for trimming stainless support bars and brackets.
Developed entirely in-house by Allproof, the Perimeter Drain with its innovative clip system sets a new standard for the future of threshold drainage solutions. This design offers a hassle-free and straightforward installation process and prioritises efficiency, and cost-effectiveness by minimising the need for custom manufacturing and streamlining installation.
This system has been designed for pedestrian foot traffic with a load class rating of A.
Please click here for related FAQs.
[caption id="attachment_8718" align="alignleft" width="88"]
Catalogue[/caption]
Perimeter Drain Read More »
The Perimeter Drain presents an innovative and premium solution for simplifying level threshold drainage. Simply position the L-shaped channel against the building’s exterior footing to establish a surface for pouring concrete against. This unique design eliminates the need for labour-intensive tasks like boxing out or multiple concrete pours.
Channels are supplied in standard one-meter lengths, the GFP grate is specially designed for the system and available off the shelf in 500mm lengths. The GFP grates and innovative clip system are manufactured in New Zealand from recycled materials. The grate is designed so it can be easily trimmed down on site to fit the reveal width along the channel as joinery steps in and out from the building line. Grates effortlessly clip onto the channel using the pre-installed fixing points, allowing for easy installation, maintenance, and a secure finish. Height-adjustable legs on the grate’s underside provide support, eliminating the need for trimming stainless support bars and brackets.
Developed entirely in-house by Allproof, the Perimeter Drain with its innovative clip system sets a new standard for the future of threshold drainage solutions. This design offers a hassle-free and straightforward installation process and prioritises efficiency, and cost-effectiveness by minimising the need for custom manufacturing and streamlining installation.
This system has been designed for pedestrian foot traffic with a load class rating of A.
Please click here for related FAQs.
[caption id="attachment_8718" align="alignleft" width="88"]
Catalogue[/caption]
Allproof Pipe Sleeves are designed to offer protection to pipework from ground movement. It is manufactured from closed cell low density polyethylene foam and comes in a range of sizes.
Allproof Pipe Sleeve has excellent compression and recovery properties.
-
- Compatible with all PVC pipe sizes from 50, 65 and 100mm
- Available in 2 metre lengths
- Easy and fast installation that can be readily cut onsite
- Excellent compression resistance
- Low moisture absorption
- Optimum wall thickness for application (nominal 6.5mm thick wall)
- Meets Green Building Council low VOC
- Manufactured with recycled materials
Pipe Sleeve Read More »
Allproof Pipe Sleeves are designed to offer protection to pipework from ground movement. It is manufactured from closed cell low density polyethylene foam and comes in a range of sizes.
Allproof Pipe Sleeve has excellent compression and recovery properties.
-
- Compatible with all PVC pipe sizes from 50, 65 and 100mm
- Available in 2 metre lengths
- Easy and fast installation that can be readily cut onsite
- Excellent compression resistance
- Low moisture absorption
- Optimum wall thickness for application (nominal 6.5mm thick wall)
- Meets Green Building Council low VOC
- Manufactured with recycled materials
Pipe Wraps are designed for installation in solid construction walls and floors, consisting of intumescent layers sealed in a polyethylene sleeve. The sleeve features double-sided tape for easy installation.
In the event of a fire, the intumescent material expands into the penetration cavity as the burning plastic pipe melts, forming a fire-resistant plug to prevent the spread of fire.
The pipe wrap is designed to have the ends of the intumescent material meet around the circumference of the pipe. No overlap exists, allowing the pipe to be centrally located within a core hole. For pipe sizes up to 100mm, only one layer of intumescent material is required, ensuring core holes can be kept to a minimum size. Allproof pipe wraps have been tested on various plastic pipes and are available in stock sizes from 40-150mm.
Made in New Zealand.
Fire Wraps Read More »
Pipe Wraps are designed for installation in solid construction walls and floors, consisting of intumescent layers sealed in a polyethylene sleeve. The sleeve features double-sided tape for easy installation.
In the event of a fire, the intumescent material expands into the penetration cavity as the burning plastic pipe melts, forming a fire-resistant plug to prevent the spread of fire.
The pipe wrap is designed to have the ends of the intumescent material meet around the circumference of the pipe. No overlap exists, allowing the pipe to be centrally located within a core hole. For pipe sizes up to 100mm, only one layer of intumescent material is required, ensuring core holes can be kept to a minimum size. Allproof pipe wraps have been tested on various plastic pipes and are available in stock sizes from 40-150mm.
Made in New Zealand.
Pipe Insulation Roll
-
- Closed-cell elastomeric foam thermal insulation in flat sheets
- Excellent flexibility allows shaping and formation around larger pipe sizes and objects such as ducts, bore pipes and boilers
- Ideal for large pipe sizes
- Lengths of up to 14 meters
- High temp material
- Suitable for stainless steel pipe
ISOPIPE has zero ozone depleting potential, with no CFCs being used in the product, or the manufacturing process. ISOPIPE products are tested accordingly to globally approved standards.
ISOPIPE products have certified fungal protection and antimicrobial characteristics. Another great development for Allproof’s thermal pipe insulation range.
Allproof ISO pipe is non-combustible and has excellent fire resistant properties. To verify this it has been independently tested to ISO5660 for a group classification in accordance with NZBC verification method C/VM2 Appendix A. Classification Group Number 1.
ISO Roll Read More »
Pipe Insulation Roll
-
- Closed-cell elastomeric foam thermal insulation in flat sheets
- Excellent flexibility allows shaping and formation around larger pipe sizes and objects such as ducts, bore pipes and boilers
- Ideal for large pipe sizes
- Lengths of up to 14 meters
- High temp material
- Suitable for stainless steel pipe
ISOPIPE has zero ozone depleting potential, with no CFCs being used in the product, or the manufacturing process. ISOPIPE products are tested accordingly to globally approved standards.
ISOPIPE products have certified fungal protection and antimicrobial characteristics. Another great development for Allproof’s thermal pipe insulation range.
Allproof ISO pipe is non-combustible and has excellent fire resistant properties. To verify this it has been independently tested to ISO5660 for a group classification in accordance with NZBC verification method C/VM2 Appendix A. Classification Group Number 1.
Thermal Pipe Insulation
For retrofit thermal pipe insulation installations, it makes sense to utilise the slit and seal thermal pipe lagging. Pre-slit, with a dual locking tape system, the SSR lagging reduces labour and installation time. Many customers have found that the cost savings have more than covered the difference in material costs.
-
- Pre-slit to reduce install time
- Secure double bonded along the slit
- No need for glue or tape
- Suitable for stainless steel pipe
ISOPIPE has zero ozone-depleting potential, with no CFCs being used in the product, or the manufacturing process. ISOPIPE products are tested according to globally approved standards.
ISOPIPE products have certified fungal protection and antimicrobial characteristics—another great development for Allproof’s thermal pipe insulation range.
Allproof ISO pipe is non-combustible and has excellent fire-resistant properties. It has been independently tested to ISO5660 for a group classification following NZBC verification method C/VM2 Appendix A. Classification Group Number 1.
ISOPipe SSR Read More »
Thermal Pipe Insulation
For retrofit thermal pipe insulation installations, it makes sense to utilise the slit and seal thermal pipe lagging. Pre-slit, with a dual locking tape system, the SSR lagging reduces labour and installation time. Many customers have found that the cost savings have more than covered the difference in material costs.
-
- Pre-slit to reduce install time
- Secure double bonded along the slit
- No need for glue or tape
- Suitable for stainless steel pipe
ISOPIPE has zero ozone-depleting potential, with no CFCs being used in the product, or the manufacturing process. ISOPIPE products are tested according to globally approved standards.
ISOPIPE products have certified fungal protection and antimicrobial characteristics—another great development for Allproof’s thermal pipe insulation range.
Allproof ISO pipe is non-combustible and has excellent fire-resistant properties. It has been independently tested to ISO5660 for a group classification following NZBC verification method C/VM2 Appendix A. Classification Group Number 1.
Allproof Drop-in fire collars offer a straightforward and efficient passive fire rating solution for thin concrete floors or trapezoidal steel tray concrete floors. These floors, featuring profile changes on the underside of the slab, pose challenges for conventional fire collars fixed beneath a floor slab.
Designed, manufactured, and tested in New Zealand for NZ projects, Drop-in fire collars can be retrofitted around pipes, easily dropping into position and fixed from above. The unique extendable tab allows for adjusting the collar to varying depths of composite floor slabs. DIFCs provide a passive fire protection system for composite floor penetrations on various plumbing services. Assessment confirms that Allproof DIFCs’ Fire Resistance Level (FRL) equals that of composite floors with tray profiles of 60mm, 80mm, and 210mm.
These collars have also undergone testing to provide passive fire protection on floor waste systems, flat slabs, and plasterboard ceilings.
Drop In Fire Collar Read More »
Allproof Drop-in fire collars offer a straightforward and efficient passive fire rating solution for thin concrete floors or trapezoidal steel tray concrete floors. These floors, featuring profile changes on the underside of the slab, pose challenges for conventional fire collars fixed beneath a floor slab.
Designed, manufactured, and tested in New Zealand for NZ projects, Drop-in fire collars can be retrofitted around pipes, easily dropping into position and fixed from above. The unique extendable tab allows for adjusting the collar to varying depths of composite floor slabs. DIFCs provide a passive fire protection system for composite floor penetrations on various plumbing services. Assessment confirms that Allproof DIFCs’ Fire Resistance Level (FRL) equals that of composite floors with tray profiles of 60mm, 80mm, and 210mm.
These collars have also undergone testing to provide passive fire protection on floor waste systems, flat slabs, and plasterboard ceilings.
Subscribe for Product Updates
