For retrofit thermal pipe insulation installations, it makes sense to utilise the slit and seal thermal pipe lagging. Pre-slit, with a dual locking tape system, the SSR lagging reduces labour and installation time. Many customers have found that the cost savings have more than covered the difference in material costs.
Pre-slit to reduce install time
Secure double bonded along the slit
No need for glue or tape
Suitable for stainless steel pipe
ISOPIPE has zero ozone-depleting potential, with no CFCs being used in the product, or the manufacturing process. ISOPIPE products are tested according to globally approved standards.
ISOPIPE products have certified fungal protection and antimicrobial characteristics — another great development for Allproof’s thermal pipe insulation range.
Allproof ISO pipe is non-combustible and has excellent fire-resistant properties. It has been independently tested to ISO5660 for a group classification following NZBC verification method C/VM2 Appendix A. Classification Group Number 1.
We love to help with technical questions and provide further product information, however please note that we don’t provide costs direct to the market. For quotes and prices please direct your enquiry through your preferred installer and/or merchant. Please see our FAQ’s for further information on this.
Report on conducted cone calorimeter testing on ISO Pipe Thermal Pipe Lagging for the purposes of determination of the Group Classification in accordance with:
New Zealand Building Code (NZBC) Verification Method C/VM2 Appendix A.
Test undertaken for Allproof Industries by 3I International Innovative Industries. Test conducted by Laboratoire national de métrologie et d’essais.
Test Summary (full results available on request):
wdt_ID
Item
Test 1
Test 2
Test 3
Average
29
HRR peak (kW/m²)
31
23
24
26
30
Ignition Time (s)
-
-
-
-
As per c-vm2 A1.3 Determining a material’s Group Number when tested to ISO 5660.
Step 1: Determine time to ignition (tig). This is defined as the time (in seconds) when the HRR reaches or first exceeds a value of 50 kW/m2.
However…
v) If the ignition criterion in Step 1 above is not reached, the material is a Group Number 1 material.
C/VM2
Verification Method: Framework for Fire Safety Design.
For New Zealand Building Code Clauses C1-C6 Protection from Fire.
Specialists in Plumbing, Drainage & Passive Fire Protection Products
Allproof Industries is a New Zealand family-owned manufacturing, marketing and distribution company specialising in Plumbing, Drainage Systems and Fire Protection Products.
View Full Catalogue
